Self-storage doors
Storage Unit Door Repair in Denver
When a storage unit door will not lift, lock or close, the unit cannot be rented. G Brothers repairs self-storage roll-up doors across the Denver metro, from one unit to several on the same property, with common parts on the truck and 24/7 emergency dispatch.
What this service covers
Real work by background-checked local technicians, quoted at a flat rate you approve before anything begins.
Springs and tension
Doors that are heavy to lift, will not stay up or drop when let go, with the spring inside the barrel replaced or retensioned.
Curtains
Dented, creased or buckled curtains repaired or replaced, including damage from a tenant's vehicle or a forced entry.
Latches and lock hasps
Bent or broken latches, slide bolts and hasps that no longer line up with the lock.
Guides and bottom bars
Bent guides straightened or replaced, and bottom bars and astragals renewed so the door closes square and seals at the floor.
Straps and pulls
Missing pull straps and handles replaced so tenants can open and close the door safely.
Several doors at once
Tell us how many doors need work when you call, so we can plan the visit and bring the parts.
Signs a storage unit door needs repair
It is hard to lift, or it slides back down when let go.
It jams partway, rubs in the guides or comes up crooked.
The latch will not catch, or the hasp no longer lines up with the lock.
The curtain is dented or creased after a hit.
Light, water or dust gets in under the door.
It makes a grinding or popping noise as it rolls up.
How a storage unit roll-up door works
Most self-storage units use a light-duty roll-up door. The curtain is a thin corrugated steel sheet that rolls around a barrel above the opening, and a spring inside the barrel carries most of its weight, so a tenant can lift it by hand. The curtain runs in a guide on each side, and a latch at the bottom bar takes the tenant's lock. Over time the spring loses tension, the guides get bent, and the latch gets worn or pried. Each of those is a repair, not a reason to replace the door. These doors work much like the larger rolling steel doors on warehouses and storefronts, only lighter.
For facility owners and managers
G Brothers works on self-storage unit roll-up doors regularly. A door that will not open, lock or close keeps a unit off the market and frustrates the tenant inside it. Call us when one door fails, or when several need work, and tell us how many so we can plan the visit. Property managers with several facilities can put every location on one account, and we can send a certificate of insurance, usually within 24 hours. A commercial maintenance plan can put the doors on a schedule, so springs, guides and latches are checked before they fail.
The rest of the facility on the same visit
A storage facility has more than unit doors. The same technician can handle commercial garage door repair on the office and drive-through doors, gate openers on the entrance, and security grilles on the office or shop front.
If you rent the unit
If you rent a storage unit and the door will not open or lock, tell the facility office first. The door belongs to the facility, and the manager can call us to fix it. Do not force a stuck door or pry at the latch, since that can bend the curtain and guides.
How it works
- 1
Call or book online
Tell us the door, what it is doing, and how many times a day it runs. Emergencies are dispatched around the clock.
- 2
On-site diagnosis and flat quote
Your technician finds the real cause and gives you one flat price to approve before any work begins.
- 3
Fixed, cycled and tested
We complete the work, balance the door, test the operator and safety devices, and run the door through full cycles before we leave.
Why facility managers call G Brothers
Fast response, day or night
Our average response is about an hour and a half, and that holds for a commercial call at 2am.
Parts on the truck
Common springs, cables, rollers and operator parts are stocked on the truck, so many repairs are finished on the first visit.
Every operator, every brand
Jackshaft, trolley, hoist and gate operators on any make, so we repair the equipment you already have.
Insured, with paperwork fast
Licensed, insured, background-checked technicians, with a certificate of insurance usually sent within 24 hours.
One account for every property
Property managers can put every door on every building on one account.
Warranty on the work
One year on labor and three years on parts.
More than 40 years in the trade
Family-owned, BBB accredited, and rated 4.9 stars across 400+ Google reviews.
Reviews
Rated 4.9 across 400+ Google reviews
Property managers, contractors and homeowners trust G Brothers for fast, honest garage door work.
Based on 400+ Google reviews
Upfront, flat-rate pricing
Your estimate is free. We look at the door on site, then give you one flat price to approve before any work begins, with an honest recommendation on whether a repair or a replacement is the better value for a door that has to keep working.

Visit us
Find G Brothers Garage Doors
Reach out for same-day garage door service. Our technicians come to you for every repair, replacement, and install.
Our shop
7700 W 9th Ave, Lakewood, CO 80214
Open 24/7 for emergency garage door service.
Common questions
Quick answers about storage unit door repair and related work from the G Brothers team.
Do you repair self-storage unit doors?
Yes. We work on self-storage roll-up doors regularly across the Denver metro.
Can a dented storage unit door be repaired?
Often. A light dent can be worked out, and a curtain that is creased or buckled can be replaced on its own without replacing the barrel, spring or guides.
Why is my storage unit door hard to open?
Usually the spring inside the barrel has lost tension, or a guide is bent and the curtain rubs. Both are repairs. Do not force the door; ask the facility office to call for service.
How much does storage unit door repair cost?
It depends on the door and which parts are damaged. The estimate is free, and you approve one flat price before any work begins.
Why is my storage unit roll-up door hard to open?
A storage unit door that is hard to lift but easy to close usually needs more spring tension; dirty or bent guides, dents, the latch or ice can also make it stick.
Read full answerHow do I open a commercial roll up door manually?
Cut the power, then use the chain hoist or floor disconnect, or lift a door with no motor by its bottom bar. Stop if it feels far heavier than normal.
Read full answerDo you offer emergency commercial garage door service?
Yes. We run 24/7 emergency commercial garage door service across Denver, fixing most stuck or unsecured doors on the first visit with stocked trucks.
Read full answerWhat types of commercial warehouse doors are there?
The main commercial warehouse doors are sectional, rolling steel, high-speed, fire-rated, and dock doors. Here is how each works and which fits.
Read full answerHow do you adjust the spring tension on a roll up door?
If the door is easy to close but hard to open, it needs more tension; hard to close and easy to open, less. A trained technician adjusts it at the barrel's tensioner.
Read full answerHow do I lubricate a roll up door?
Oil a roll up door's chain and gears, grease its bearings at the fittings, keep the guides and curtain clean, and leave the tension wheel to a technician.
Read full answerWhy won't my roll up door go down?
A roll up door that won't go down usually has a lock still on, too much spring tension, a bent guide or bottom bar, a snagged end lock, or a motor limit or sensor stopping it.
Read full answerWhat sizes do roll up doors come in?
Roll up doors are built to the opening: storage doors top out near 10 by 10 feet, light and medium duty doors near 12 to 20 feet wide, and rolling service doors at 30 feet 4 inches.
Read full answerHow do you lock a roll up door?
Close a roll up door all the way and slide the bottom bar bolt into the guide, add a padlock, use a center lock or latch from outside, and fit an interlock on a motor door.
Read full answerWhy is my roll up door so noisy?
A squeal points to a dry barrel bearing, scraping to grit or a bent guide, banging to loose endlocks, and a clatter to a dry chain; a door that groans or feels heavy has a spring problem.
Read full answerCan you replace a slat on a roll up door?
Yes. Roll up door slats interlock, so a dented, kinked or torn slat slides out and a matching one slides in; the profile, gauge and height must match, and fire doors need the maker's parts.
Read full answerWhat are the parts of a roll up door?
A roll up door is a curtain of interlocking slats with endlocks and a bottom bar, riding in two side guides, coiled on a spring-loaded barrel under a hood, and moved by a hand chain, crank or motor.
Read full answerRelated services
Service areas
Storage Unit Door Repair across the Denver metro
We provide storage unit door repair across the Denver metro, including Denver, Lakewood, Aurora, Commerce City, Arvada, Wheat Ridge, Golden, Englewood, Littleton, Centennial, Westminster, Thornton, and Broomfield, plus surrounding communities. Not sure if you are in range? Call and we will let you know.
DenverGarage door service
LakewoodGarage door service
AuroraGarage door service
Commerce CityGarage door service
ArvadaGarage door service
Wheat RidgeGarage door service
GoldenGarage door service
EnglewoodGarage door service
LittletonGarage door service
CentennialGarage door service
WestminsterGarage door service
ThorntonGarage door serviceRequest a commercial quote
Ready to get started?
Book same-day service or a free estimate. Available 24/7.
Learn more
Guides & resources
Learn more about storage unit door repair before you book.