Opener repair
Garage Door Opener Repair
When an opener hums, clicks, stops short or does nothing at all, the fault is usually one part: a gear, a board, a limit setting or a sensor. G Brothers diagnoses the fault before we quote and fixes most openers the same day. If the opener is past repairing, we say so.
- Same-day service
- 4.9 stars, 400+ reviews
- Licensed & insured
What this service covers
Real work by background-checked local technicians, quoted at a flat rate you approve before anything begins.
Gears, sprockets and drive parts
Stripped gears, worn sprockets, trolleys, chains and belts replaced.
Boards, capacitors and motors
Failed electronics diagnosed and replaced where the opener is worth keeping.
Limits, force and sensors
Travel limits and force settings adjusted, and safety sensors aligned or replaced.
Situations we fix every week
- Your opener clicks, but the door won’t budge?A click means the opener is getting power and trying. The door not moving usually points to a broken spring, a stripped drive gear, or the trolley disconnected. Here's how to tell which.How we fix it
- Not sure if your garage door opener is worth fixing?Most openers we're called about get repaired. We recommend a new one when the drive is worn out, it can't learn new remotes, or it won't hold its settings. Here's how we tell the difference.How we fix it
- Garage door remote or keypad stopped working?If the wall button still opens the door, the opener is fine and the problem is the remote, the keypad or the programming. On most of these calls we reprogram or replace the remote and you're done.How we fix it
- Does your garage door stop before it is fully open or fully closed?The opener has two settings that decide where the door stops: the travel limits and the force. When either drifts, or the door gets harder to move, it stops early or reverses. Here is how to tell which one it is.How we fix it
- Your garage door opener runs, but the door doesn’t move?When the garage door opener motor runs and the door stays put, the motor is turning but nothing is connecting it to the door. The usual causes are a disconnected trolley, a broken belt or chain, or a loose door arm.How we fix it
- Garage door opener humming or buzzing?A hum with no movement usually means the motor is trying and something is holding it back: a stuck door, a worn start part or a failing drive gear. A buzz while it runs is more often loose hardware. Stop pressing the button repeatedly and read the sound first.How we fix it
- Garage door opener completely dead?If the opener has no light, no click and no hum, it is not getting power or its board has failed. Check the plug, the GFCI and the wall console before you assume the opener is finished.How we fix it
- Garage door opens by itself?A door that opens with nobody pressing anything is a security problem and a fault. The usual causes are a stuck button, a remote being pressed in a bag, an old fixed code, or a failing board. Unplug the opener while you track it down.How we fix it
- Opener light stays on or blinks?A light that stays on is often a console setting, a stuck button or a bulb problem. Flashing lights can be the opener telling you it found a fault, often a safety sensor. Check which one you have before you change anything.How we fix it
- LiftMaster opener blinking or flashing?Blink patterns are the opener's way of reporting a fault. The exact meaning depends on your model, so find the label or your manual and match the count. Most patterns fall into a few categories: sensors, travel limits, the motor, the board, or a wall control.How we fix it
- Emergency release cord stuck?A release cord that will not move is usually binding because the opener is pressing on the trolley, or the cord has jammed. Do not yank it. If the door is also heavy, stop, because the real problem may be a spring.How we fix it
- Pulled the release and can't reconnect it?Reconnecting usually means getting the door and the carriage to the same spot so the trolley can latch. If it will not catch, the door may be out of balance, the lever bent, or the arm out of position.How we fix it
From our job records
Most opener repairs are a short visit. These numbers come from our own completed repair records, not including new openers or remotes.
- Opener repair jobs since 2017
- 186
- Typical time on site
- 39 min
- Busiest season (Mar to May)
- Spring
Time on site is the median of the 17 jobs with a logged start and finish.
What the repairs involved
- Safety sensors47 of 186 jobs
- Gears, chain, belt or drive21 of 186 jobs
- Travel limits or force21 of 186 jobs
- Arm, bracket or hardware19 of 186 jobs
- Board, capacitor or motor4 of 186 jobs
When to repair vs replace an opener
The opener hums or clicks but the door does not move, often a gear, a capacitor, or a broken spring
It runs then reverses, usually a sensor or a travel limit
The door stops short of open or closed, usually the limits or the force setting
It is older than about 15 years, loud, or has no photo-eyes: replace it instead
How it works
- 1
Call or book online
Tell us what the opener is doing. We schedule a same-day or next-day visit.
- 2
Door first, then opener
Your technician checks the springs and the door, then the opener, so you only pay to repair what is actually broken.
- 3
Fixed and tested
We repair the fault, reset the limits and force, test the sensors, and leave the door running safely.
Why homeowners call G Brothers
Voted Best Garage Door Company, three years running
And rated 4.9 stars across 400+ Google reviews.
More than 40 years of experience
Family-owned, locally operated, and BBB accredited.
Free, no-obligation estimates
We look, diagnose, and quote a flat price you approve before any work starts.
Same-day and 24/7 emergency service
Most repairs are handled the day you call.
Background-checked, licensed, and insured technicians
Local crews you can trust in your home.
No pressure, done right the first time
We recommend a repair over a replacement whenever that is the right call, and back it with a workmanship guarantee.
Reviews
Rated 4.9 across 400+ Google reviews
Homeowners and businesses trust G Brothers for fast, honest garage door work.
Based on 400+ Google reviews
Upfront, flat-rate pricing
Your estimate is free. We diagnose the problem on site, then give you one flat price to approve before any work begins. No surprises, no pressure, and an honest recommendation on whether a repair or a replacement is the better value. Free estimates cover garage door repair, spring, opener, and replacement work. Remote and keypad programming is not included.
Visit us
Find G Brothers Garage Doors
Reach out for same-day garage door service. Our technicians come to you for every repair, replacement, and install.
Our shop
7700 W 9th Ave, Lakewood, CO 80214
Open 24/7 for emergency garage door service.
Related questions
Quick answers about opener repair and related work from the G Brothers team.
Can a garage door opener be repaired, or does it need to be replaced?
Most garage door openers can be repaired if a specific part has failed.
Read full answerWhy is my garage door opener not working?
Garage door opener not working? Check the power, remote battery, sensors, and travel limits first. Here is what is DIY-safe and what needs a tech.
Read full answerShould I repair or replace my garage door opener?
Should you repair or replace your garage door opener? Repair a newer unit with one failed part. Replace one over 15 years old or missing safety sensors.
Read full answerDo the springs or the opener lift my garage door?
The springs lift your garage door, not the opener. They counterbalance the weight and the opener just guides it. Here is why that matters.
Read full answerHow do I troubleshoot a Chamberlain garage door opener?
Check the safety sensors first, then power, then the remote.
Read full answerWhat does it mean when my garage door opener is beeping?
A beeping garage door opener usually signals one of three things: a battery backup running low, an alert that the door has been open too long, or a warning that the opener needs service.
Read full answerWhy is my garage door opener grinding but the door still moves?
A grinding opener that still moves the door usually has a worn drive gear, a dry or gritty chain or belt, or debris in the rail.
Read full answerWhy is my garage door opener motor overheating and shutting off?
The motor has a thermal overload protector that cuts power when it gets too hot, usually after repeated cycles without a cool-down break, or because it is straining against a heavy or unbalanced door.
Read full answerWhy does my garage door opener only work sometimes?
Intermittent opener problems point to four main causes: a weak or dead remote battery, radio frequency interference near the opener, a dirty or misaligned safety sensor, or a loose wire on the wall button.
Read full answerWhat do the blinking lights on a Genie garage door opener mean?
Genie openers use blink codes from the motor unit LED to report faults.
Read full answerHow do I troubleshoot a Genie garage door opener?
Start with power, then the safety sensors.
Read full answerWhy is my garage door opener buzzing or humming?
A garage door opener starts humming or buzzing when the motor gets power but cannot turn the drive. The length of the sound tells you which fault it is. A one second hum points to a locked door, a broken spring, or a trolley jammed on the stop bolt. A constant buzz with the door idle is electrical.
Read full answerWhy does my garage door opener smell like it is burning?
A burning smell from a garage door opener comes from one of four places: a failing start capacitor, an overheating motor, a stripped plastic drive gear, or grease cooking off a hot housing. A sharp electrical or fishy smell means unplug the opener now. A faint grease smell that fades is usually harmless.
Read full answerRelated services
Related products
Service areas
Opener Repair across the Denver metro
G Brothers brings opener repair to homes and businesses throughout the Denver metro. Find your city below.
Ready to get started?
Book same-day service or a free estimate. Available 24/7.
Learn more
Guides & resources
Learn more about opener repair before you book.
- Garage Door Opener Repair: Why Your Door Won't Close All the WayIf your garage door won't close all the way, the most common cause is a misaligned or blocked safety sensor near the floor. Other causes include travel-limit settings, a binding track, or a failing opener.Read guide
- Garage Door Remote Not Working? How to Fix ItIf your garage door remote is not working, start with the batteries. A dead or weak battery is the cause about half the time. If fresh batteries do not help, the issue is likely the sensor, antenna, or a lost pairing.Read guide
- How to Open a Garage Door Manually During a Power OutageWhen the power goes out, pull the red emergency-release cord hanging from the opener rail to disengage the motor, then lift the door by hand. The springs carry the door's weight, so a well-maintained door should rise smoothly and stay open on its own.Read guide
- How to Install a Garage Door Opener: What to Know Before You StartInstalling a garage door opener is a manageable DIY project for most homeowners on a single-car door. The steps that catch people are the sensor alignment and travel limit setup, not the physical assembly.Read guide