Amarr Garage Door Replacement in Denver: Every Collection We Install

Amarr’s collections look similar in a brochure. They are not the same door. The differences that matter in Colorado are the steel gauge, what is inside the panel, and how long each warranty runs, and those change from one Amarr collection to the next and from one model number to the next inside a collection.

This page lays the collections side by side so you can narrow the field before we measure your opening. Every number comes from Amarr’s published specifications for the collection.

Planning a garage door replacement? This page helps you narrow the choice. For how a replacement works from measure to install, see our garage door replacement service, or new garage door installation in Denver and in Lakewood. If a broken spring is what brought you here, start with garage door spring repair. Besides Amarr, we install Clopay, Wayne Dalton, Hörmann, C.H.I., Ankmar, Doorlink and Northwest Door doors.

How the steel collections compare

Gauge runs backwards: a lower number is thicker steel. Insulation is described by R-value, where higher means more resistance to heat moving through the door. “Workmanship” is Amarr’s warranty on the build of the door, separate from its paint warranty.

Amarr steel collections, top-tier models
CollectionModelSteel gaugeInsulationR-valueWorkmanship warranty
HeritageHR300024 outer / 27 innerPolystyrene9.05Lifetime
LincolnLI300025Polystyrene9.05Lifetime
HillcrestHI300025Polystyrene9.053 years
ClassicaCL300025 / 27Polyurethane13.35Lifetime
OlympusOL320027 / 27Polyurethane19.40Lifetime
NorthwoodsNW300024 / 27Polystyrene9.053 years
Carriage Courtone model27 / 27Polystyrene6.485 years (hardware)

Which Amarr collection fits which house

  • Traditional raised-panel look on a ranch or colonial: Lincoln, or Heritage if you want the heavier 24-gauge outer skin on every model.
  • Carriage-house look: Hillcrest (bead board and recessed panels), Classica (overlay designs with arch details), or Carriage Court (18 designs with a composite overlay).
  • Modern plank look for newer homes: Northwoods, in Cedar or Aspen Gray.
  • Garage that is used as a workshop, gym or room: Olympus, which is the highest-R line Amarr makes among these collections, or Classica CL3000.
  • Glass and aluminum for a contemporary front: Horizon, a full-view door with a 2-inch aluminum frame.

Reading the model numbers

Inside Lincoln, Hillcrest, Heritage and Classica the model number tells you the build. The 1000 is a single layer of steel with no insulation. The 2000 adds polystyrene insulation (R-6.64). The 3000 is a three-layer door. Lincoln and Hillcrest also offer a 3138, which uses 27-gauge steel on both faces and a lower R-value (6.48) than the 3000 (9.05): the 3138 trades some insulation for a more dent-resistant skin, while the 3000 is the better insulator.

That trade-off is the question we help with at the estimate. A garage that shares a wall with a bedroom wants the insulation. A detached garage in a hail-heavy neighborhood may want the heavier steel more.

What company owns Amarr?

ASSA ABLOY, the Swedish group behind many door and lock brands, has owned Amarr since 2013. Amarr was founded in 1951, is based in Winston-Salem, North Carolina, and makes both residential and commercial garage doors.

Amarr garage doors in Denver: from measure to install

G Brothers installs Amarr residential garage doors across the Denver metro, from Denver and Lakewood to Arvada, Wheat Ridge, Golden, Littleton, Westminster and Aurora. The Amarr collections above are the ones we put in, so you can shortlist a look and an insulation level before anyone comes out, whether you want a plain steel door or an insulated garage door for a garage you heat.

It starts with a free in-home measure. We measure the opening, the headroom above it and the room at each side, look at the wall the track fastens to, and check whether your opener can stay with the new door. You choose the Amarr collection, color and windows with the opening in front of you, and we give you one flat installed price to approve before anything is ordered.

On install day the crew takes out the old door, hangs the new sections with track and springs sized to the new door’s weight, tunes the opener, tests the balance and safety reverse, and hauls the old door away. A single door usually takes two to four hours. Changing the size of the opening takes longer, and in Denver it needs a permit, which we handle.

Along the Front Range the two numbers worth weighing are the ones in the tables on this page: heavier steel where hail is common, and a higher R-value where the garage shares a wall with the house. Call (720) 421-6489 or book online to set up your measure.

If your Amarr door won't open or close today, you may not need a new door at all. A broken spring, a cable off its drum or an opener fault is usually a repair, and our garage door repair crews work on Amarr doors as well as the other brands we install.

Want help choosing the right door?

We measure the opening, talk through how you use the garage, and give you a flat-rate quote for the door that fits.