Garage door track repair

Garage door grinding, jerking, or a roller popped out?

That usually means worn rollers. When their bearings wear out, the rollers drag instead of rolling, and the door gets loud and jerky. Left too long, a roller can come out of the track.

  • Same-day service
  • 4.9 stars, 400+ reviews
  • Licensed & insured

Is this what you're seeing?

  • The door grinds, rumbles or shudders as it moves.

  • One or more of the wheels along the sides of the door wobbles, is cracked, or doesn’t spin.

  • A roller has come out of the track.

  • It’s been years since the door was serviced.

What's going on

Rollers sit in hinges on the edges of the door and ride inside the vertical and horizontal track. Most have small bearings, and when those wear out the roller stops turning and slides instead.

That drag makes noise, puts strain on the opener, and can let a roller jump out of the track. Rollers often get replaced along with springs, because both wear with the same years of use.

What to do right now

Do

  • Watch the door run and note any roller that wobbles or doesn’t spin.

  • If a roller has come out of the track, stop using the door and unplug the opener.

Don't

  • Don’t remove the bottom rollers yourself. The bottom brackets are under cable tension.

  • Don’t force a roller back into a bent track.

  • Don’t grease the tracks. That collects grit and makes it worse.

How we fix it

Roller replacement is part of our garage door track repair work. Our records show what else these roller jobs involved.

What the work involved

  • Rollers replaced78 of 117 jobs
  • Door lubricated64 of 117 jobs
  • Springs47 of 117 jobs
  • Hinges10 of 117 jobs
  • Tracks adjusted or aligned7 of 117 jobs
Roller jobs since 2017
117
Typical time on site
90 min
Busiest season
Spring

Recent jobs like this

  1. Jul 2026

    West metro

    Found

    A roller had come out of the track.

    Fixed

    Put it back in the track during a lube and tune.

  2. Mar 2026

    Thornton

    Found

    The rollers had no bearings left in them.

    Fixed

    Flagged them for replacement during a tune-up.

  3. Mar 2026

    Golden

    Found

    The springs, rollers and cables all needed replacing.

    Fixed

    Replaced both springs, put in 10 nylon rollers, and replaced the cables.

  4. Mar 2026

    Denver

    Found

    The door was due for new rollers.

    Fixed

    Replaced 10 rollers, tuned up the door and lubricated it.

  5. May 2026

    Denver metro

    Found

    The rollers were worn and the top section needed adjusting.

    Fixed

    Replaced 12 rollers and adjusted the top section.

  6. Jun 2025

    Lakewood

    Found

    Three doors at one home had worn rollers, and one opener needed replacing.

    Fixed

    Replaced 30 rollers across the three doors, replaced the opener and a remote, and lubricated and adjusted all three.

Repair or replace?

New rollers are a repair, and a quick one. If sections are cracked or the door is badly worn overall, we’ll tell you whether a new door makes more sense.

FAQ

Related questions

When do garage door rollers need replacement?

Garage door rollers need replacement about every 7 years or 10,000 cycles. Learn the warning signs, nylon vs steel options, and why worn rollers fail.

Read full answer
Nylon vs steel garage door rollers: which should I choose?

Nylon rollers run much quieter, need no lubrication, and resist rust, so they are the better choice for an attached garage.

Read full answer
What does a grinding garage door noise mean?

A grinding garage door noise usually means worn rollers, dry bearings, or a stripped opener gear. Here's what each grinding sound means and how to fix it.

Read full answer
How do I reduce garage door noise?

Replace steel rollers with nylon rollers (significantly quieter than steel), lubricate spring coils, hinge pivots, and roller shafts with silicone spray, tighten loose hardware, and add anti-vibration pads between the opener mount and ceiling joists.

Read full answer
How do I stop my garage door from squeaking?

To stop a garage door squeaking, lubricate the hinges, rollers, springs, and bearings with the right product. Here's the fix and why WD-40 makes it worse.

Read full answer

Get your door running smoothly

Book same-day service or call us. Available 24/7.