Repair
Garage Door Frame and Jamb Repair in Denver
Garage door frame repair means replacing the rotted, split or loose wood jambs on the sides of the opening, fastening the new frame to the wall, and hanging the door track back on solid wood. G Brothers does garage door frame and jamb repair across the Denver metro, and because the track hangs from the jamb, the same crew handles the door work that has to happen before and after the carpentry.
Frame and jamb work is part of our garage door repair.
What this service covers
Real work by background-checked local technicians, quoted at a flat rate you approve before anything begins.
Rotted jamb replacement
Soft or split jamb boards come out, and new wood goes in on one or both sides of the opening.
Frame fastened to the wall
The new jamb is secured to the wall framing behind it, so the track has something solid to hold.
Track re-hung in solid wood
The vertical track and its brackets go back on with fresh lag screws, set plumb and the right distance from the door.
Stop molding and seal renewed
The trim and vinyl jamb seal that close the side gap are fitted to the new frame.
Door balanced and tested
Springs, opener force and travel limits are checked so the door runs smoothly and still reverses on contact.
Signs your garage door frame needs repair
A screwdriver sinks into the bottom of the jamb, or the wood crumbles near the slab
Track brackets pull away from the wall, or their lag screws spin without biting
A gap is opening between the jamb and the wall, or daylight shows down the side
The door rubs, binds or shifts sideways on one side as it moves
The jamb is cracked or pushed in after a car or trailer bumped it
Is your garage door frame out of shape?
A frame can be solid wood and still be out of line. A few checks from inside the garage, most of them with the door closed, tell you which problem you have.
Hold a level against each jamb. A jamb that leans in at the top or bottom has moved, and the track fastened to it has usually moved with it.
Measure the opening at the top and the bottom. When the width is different by more than a little, one side of the frame has shifted.
Look at the gap down each side. An even strip of daylight is usually worn seal. A gap that is wide at one end and tight at the other points to the frame or track.
Check the track brackets. Brackets that rock when you push them, or screw heads that sit proud of the bracket, mean the wood behind them is no longer holding.
Watch the door move. From a safe distance, see whether the door drifts toward one jamb, rubs, or shakes as it passes the same spot each time.
None of these checks needs a tool beyond a level and a tape. If any of them shows movement, stop adjusting and call, because bending a track to fit a crooked frame only moves the problem and can unbalance the door.
What wears out a garage door frame
Most frame problems start at the bottom of the opening and work their way up.
Water at the slab. Snowmelt, rain and driveway splash soak the end grain of the jamb every winter, and wet wood is where rot begins.
Vehicle bumps. A mirror or bumper that catches the jamb can split the wood or loosen it from the wall, even when the door itself looks fine.
Track load. The door's weight pulls on the track brackets every time it moves. Once the wood softens, the screws loosen and the track starts to lean.
Old fasteners. Nails and screws from the original build back out as the wood dries and shrinks, and the frame drifts out of plumb.
Fixing the frame without fixing the reason it failed means doing it again in a few years, so we look at drainage, the bottom seal and how the door sits while we are there.
Repair the frame or replace it with the door?
The frame and the door are separate jobs, but they share the same opening.
Frame only. When the door is sound and only the jambs are soft or split, we replace the jambs and put your existing door back in service.
Frame with a new door. When the door is near the end of its life too, doing the jambs during a new door installation means the opening is taken apart only once.
Track work too. A track that bent while the frame was failing is straightened or replaced in the same visit.
We give you an honest answer on which makes sense for your garage, and the flat price for each, before anything is taken apart.
What a soft jamb does to the rest of the door
A garage door frame is more than trim. Several parts of the door depend on it staying straight and solid.
The vertical track. Each track is bolted to the jamb with brackets. When the wood gives, the track tips in or out, the rollers bind, and the door can rub, jump or come off the track.
The safety sensors. The photo-eye sensors sit low on each side of the opening. A jamb or track that shifts takes a sensor with it, and the door starts reversing or refusing to close.
The side seal. The stop molding and vinyl seal are nailed to the jamb. A frame that moves opens a draft and lets snow, leaves and mice in down the side.
The springs and opener. A door that drags against a crooked track makes the opener work harder and puts extra strain on the springs and cables every cycle.
That is why a frame repair ends with the door being tested, not just the wood being painted. A new jamb is only finished when the door runs straight past it.
What we check before we quote
Your technician looks at the whole opening, because rot you can see is rarely all the rot there is.
How high the damage goes. We probe the jamb from the slab up to find where solid wood starts.
The wall framing behind it. If the studs behind the jamb are soft too, you hear about it before any price is given.
The header across the top. The header board carries the top of the opening and the spring hardware on many doors, so we check it as well.
Track and bracket condition. Bent track, stripped holes and missing lag screws are noted so they are fixed in the same visit.
The door itself. Panels, rollers, hinges, springs and the opener are looked over, so you can decide on frame only or frame and door with the full picture.
You get one flat price for the work you choose, and nothing starts until you approve it.
After a car hits the garage door frame
Backing into the side of the opening is one of the most common reasons a frame needs work.
Leave the door where it is. If it binds or sits crooked after the hit, running the opener can pull the track further out of line.
Look for a gap at the jamb. A jamb pushed away from the wall, a split board or a bracket hanging loose all mean the frame needs repair, not just the door.
Take photos. Pictures of the jamb, the track and any dented sections help us bring the right parts and help with an insurance claim.
Call for a check. We look at the frame, the track and the door sections together, since one bump often damages all three.
If a section of the door was dented too, a single panel can often be swapped on its own when the rest of the door is sound.
Keeping the new frame from rotting
Denver-area garage openings take freeze and thaw, spring snow and summer hail, so a new jamb needs help to last.
A bottom seal that works. A torn or flat bottom seal lets meltwater run along the slab to the jambs. Replacing it is one of the cheapest ways to protect new wood.
Paint or seal every cut end. Bare end grain at the bottom of a jamb soaks up water fastest, so it gets sealed before it goes in.
Keep snow off the opening. Shoveling or blowing snow away from the door edges keeps water from sitting against the frame for days.
Watch the downspouts. A gutter that empties beside the garage door soaks the same corner every storm. Moving the outlet away from the opening helps the frame last.
A yearly look. A Lube and Tune visit or the annual maintenance plan is a good time to catch a soft spot before it reaches the track brackets.
How it works
- 1
Call or book online
Tell us what the frame and door are doing, and send a photo if you can. We schedule a visit at no charge to look.
- 2
On-site diagnosis and flat quote
Your technician checks how far the rot goes, how the track is holding and whether the door needs work, then gives you one flat price to approve.
- 3
Door made safe, frame replaced, door reset
The springs are relaxed and the track taken off before any wood comes out, then the door is re-hung, balanced and tested.
Why homeowners call G Brothers
Voted Best Garage Door Company, three years running
And rated 4.9 stars across 400+ Google reviews.
More than 40 years of experience
Family-owned, locally operated, and BBB accredited.
Door work and frame work in one visit
The track hangs from the jamb, so the people who replace the wood also unload, re-hang and balance the door.
About an hour and a half to arrive on average
For business hours and emergency calls alike.
Background-checked, licensed, and insured technicians
Local crews you can trust in your home.
No pressure, done right the first time
We recommend a repair over a replacement whenever that is the right call.
Reviews
Rated 4.9 across 400+ Google reviews
Homeowners and businesses trust G Brothers for fast, honest garage door work.
Based on 400+ Google reviews
Upfront, flat-rate pricing
Your estimate is free. We diagnose the problem on site, then give you one flat price to approve before any work begins. No surprises, no pressure, and an honest recommendation on whether a repair or a replacement is the better value. Repairs come with a one-year warranty on labor and three years on parts, and payment plans are available on bigger jobs.

Visit us
Find G Brothers Garage Doors
Reach out for same-day garage door service. Our technicians come to you for every repair, replacement, and install.
Our shop
7700 W 9th Ave, Lakewood, CO 80214
Open 24/7 for emergency garage door service.
Common questions
Quick answers about garage door frame and jamb repair and related work from the G Brothers team.
Can a garage door frame be repaired, or does it have to be replaced?
Light damage, like a split piece of stop molding or a small soft spot above the slab, can sometimes be cut out and patched. When rot runs up the jamb or the track screws no longer hold, the jamb board on that side is replaced. We show you what we find before we quote.
How do you fix a gap between the garage door and the frame?
A thin, even gap is usually worn vinyl jamb seal or stop molding, which can be replaced. A gap that is wider at the top or bottom usually means the jamb or the track has moved, and that needs the frame fastened back to the wall and the track reset.
Can I keep using the door while the jamb is rotted?
If the track brackets are still tight, usually yes for a short time. If the track is leaning, the screws spin, or the door rubs on that side, stop using it and call. A track that pulls free can let the door come out of its rollers.
What happens if a car hits the garage door frame?
A hit can split the jamb, push it in, or loosen it from the wall, and it often bends the track on that side too. Leave the door where it is if it binds, and we check the frame, the track and the door sections together.
Why does the track have to come off before the jamb is replaced?
The vertical track is bolted to the jamb, and the door's springs hold a lot of tension. The springs are relaxed and the track removed first so nothing can drop or swing while the old wood comes out.
Do you replace the jambs when you install a new door?
When the frame is soft or out of plumb, yes. It is the best time to do it, because the old door is already out of the opening.
Can I replace a garage door jamb myself?
The wood is ordinary carpentry, but the track is fastened to the jamb and the springs hold the door's weight. Taking the track off a door under spring tension is dangerous without training, so the door side of the job is best left to a technician.
Is the header part of the garage door frame?
Yes. The frame is the two side jambs and the header board across the top. On many torsion spring doors the spring bracket is fastened near the header, so a soft header matters as much as a soft jamb.
Can a rotted jamb make the door reverse on its own?
It can. The safety sensors mount low on each side of the opening, and a jamb or track that has shifted can knock them out of line. Once the frame is solid again, the sensors are realigned and tested.
Can I use my garage door if one spring is broken?
No. With a broken spring the opener is lifting the full weight of the door, which can strip its gears or drop the door. Leave it closed and call for a spring repair. If the frame is soft too, both are fixed in one visit.
How do you replace the trim around a garage door?
Replacing garage door trim means replacing one of four different parts, and only two are DIY. Stop molding (the strip the door closes against) and exterior brickmold pry off and nail back on in an afternoon. Header flashing is a siding job. The jamb board carries the track, so leave it alone.
Read full answerHow do I fix gaps on the sides of my garage door letting in cold air?
Side gaps usually mean the stop molding weatherstrip is worn, compressed, or missing.
Read full answerWhy is there a gap on one side of my garage door when it's closed?
A gap on one side of a closed garage door usually means the door is not level, the vertical track is misaligned, or the stop molding on that side has shifted or worn down.
Read full answerWhy is there a gap at the top of my garage door?
A gap at the top of a closed garage door usually means the top seal is worn, the top fixtures need adjusting, or the opener stops the door short of full close. Less often the top section is bowed or the header has settled. Only the seal is a cheap fix.
Read full answerWhat are the different types of garage door weather seals?
Garage doors use four main weather seals: a bottom seal in the door's lower edge, a threshold seal on the floor, side and top weatherstripping around the frame, and thin seals between the panels.
Read full answerService areas
Garage Door Frame and Jamb Repair across the Denver metro
We provide garage door frame and jamb repair across the Denver metro, including Lakewood, Denver, Golden, Arvada, Littleton, Wheat Ridge, Aurora, Morrison and Thornton, plus surrounding suburbs. Not sure if you are in range? Call us and we will let you know.
LakewoodGarage door service
DenverGarage door service
GoldenGarage door service
ArvadaGarage door service
LittletonGarage door service
Wheat RidgeGarage door service
AuroraGarage door service
MorrisonGarage door service
ThorntonGarage door service
EnglewoodGarage door service
BroomfieldGarage door service
CentennialGarage door serviceReady to get started?
Book same-day service or a free estimate. Available 24/7.
Learn more
Guides & resources
Learn more about garage door frame and jamb repair before you book.