What are the best myQ HomeKit alternatives in 2025?

Chamberlain Group makes LiftMaster, Chamberlain, and Craftsman openers. In 2023, they removed native HomeKit support from the myQ platform as part of a move to block third-party apps. If you have an Apple Home setup and want to control a garage door through it, myQ no longer works. The good news is that several good alternatives add HomeKit without any subscription fee. Here is what each option does, what it costs, and which opener types it supports.

Why myQ dropped HomeKit and what to know first

In late 2023, Chamberlain Group cut off third-party API access to myQ. This ended support for Home Assistant, Google Home, Alexa, and Apple HomeKit. The official myQ Home Bridge hub was discontinued.

Chamberlain said they wanted to control the smart home experience through their own ecosystem. The myQ app itself still works for basic remote control. Amazon Key delivery still works through myQ. But outside services like HomeKit lost access.

The myQ Home Bridge, which was the official hardware device that linked myQ to HomeKit and other platforms, was removed from sale and is no longer manufactured. If you have an old myQ Home Bridge, it may still function for now, but it is an end-of-life product with no support or updates.

For any opener with a yellow learn button (Security+ 2.0, made roughly from 2011 to 2024), several replacement devices restore HomeKit. For openers with a white learn button (Security+ 3.0, introduced in late 2025), options are more limited. The new Security+ 3.0 protocol uses encrypted Bluetooth pairing that blocks most third-party hardware.

The Meross MSG100HK: cheapest HomeKit option

The Meross MSG100HK is a small wired unit that connects to any opener via dry-contact wiring. This is the same two-wire connection used by the wall button. It also includes a small magnetic sensor that attaches to the door frame to detect if the door is open or closed.

Setup steps: wire the Meross unit to the opener's wall button terminals. Attach the magnetic sensor to the door frame. Scan the HomeKit pairing code on the unit in the Apple Home app. Done. No hub, no bridge, no monthly fee.

Key facts: - Price: about $30 to $40 - Works with: any opener with wall button terminals (virtually all residential openers) - HomeKit: yes, HomeKit-certified (Matter certification status varies by hardware revision; check current listing) - Subscription: none - Works with Security+ 3.0: yes, because it uses wired dry-contact and ignores the radio protocol - Limitation: cannot read safety sensor status or advanced opener data

The MSG100HK is the right pick for anyone who wants HomeKit at low cost and does not need obstruction sensor status in the app.

Konnected GDO blaQ: best for Security+ 2.0 openers

The Konnected GDO blaQ is a $90 plug-in device. It connects to the data port on LiftMaster and Chamberlain Security+ 2.0 openers. It reads the actual data bus from the opener and can report door position, obstruction sensor status, and even the opener's motion sensor. No separate magnetic sensor is needed.

Key facts: - Price: about $89 - Works with: LiftMaster and Chamberlain openers with yellow learn button (Security+ 2.0) - HomeKit: yes, native HomeKit over Wi-Fi - Subscription: none - Reports: door state, obstruction sensors, motion detection - Works with Security+ 3.0: no

The blaQ is a good match if you have a Security+ 2.0 LiftMaster or Chamberlain and want the full feature set, including safety sensor status in the Apple Home app.

ratgdo and other DIY options: comparison

ratgdo is an open-source project by Paul Wieland. The name is short for "Rage Against the Garage Door Opener." It is a small Wi-Fi board that wires to the same data port as the blaQ. It communicates through ESPHome or MQTT and can connect to HomeKit via Homebridge.

Key facts for ratgdo: - Price: about $25 to $40 for the board - Works with: LiftMaster and Chamberlain Security+ 2.0 (yellow learn button) - HomeKit: yes, through Homebridge or ESPHome - Subscription: none (fully local, no cloud required) - Works with Security+ 3.0: no

ratgdo is built for people who use Home Assistant, ESPHome, or Homebridge and want full local control with no cloud involved. The board is cheap, but setup takes technical knowledge: flashing firmware, setting up ESPHome or MQTT, and bridging to HomeKit via Homebridge.

Genie openers are not covered by any of the three options above. Genie uses a different data bus. The Genie Aladdin Connect module adds app control and Alexa support but does not currently support HomeKit natively. A Homebridge plugin exists for Aladdin Connect but it requires an active internet connection and is not officially supported by Genie. For HomeKit on a Genie opener, the Meross MSG100HK dry-contact option is the most reliable path.

Side-by-side comparison of all options:

Device	Price	HomeKit	Works with SP3.0	Setup	Subscription
Meross MSG100HK	$30-$40	Yes (HomeKit)	Yes (wired)	Easy	None
Konnected GDO blaQ	$89	Yes (native)	No	Easy	None
ratgdo	$25-$40	Via bridge	No	Technical	None
myQ (original)	$0 app	No (dropped)	Yes (myQ only)	Easy	Partial

What works with Security+ 3.0 openers

If your opener has a white learn button, it uses Security+ 3.0. This protocol uses encrypted Bluetooth Low Energy. It blocks ratgdo and the blaQ from working. Both of those devices rely on reading the older Security+ 2.0 data bus, and the new protocol does not allow that.

To check your learn button color: open the garage, locate the motor unit on the ceiling, and find the small button on the back or side of the unit. Yellow means Security+ 2.0. White means Security+ 3.0. Purple, red, or orange means older Security+ 1.0 (all three HomeKit options above use dry-contact for 1.0 as well).

The Meross MSG100HK works with Security+ 3.0. It uses a wired dry-contact relay that closes the same circuit as pressing the wall button. This is a mechanical approach, not a radio or data approach, so the protocol does not matter.

Other wired relay devices like the Shelly 1 ($15) or Sonoff MINIR2 ($10) also work with Security+ 3.0. They use the same dry-contact method. The difference is that they need a bridge like Homebridge or Home Assistant to show up in HomeKit. The Meross is the only option that works with HomeKit out of the box, with no bridge needed.

If you have a Security+ 3.0 opener and want HomeKit, the Meross MSG100HK is the simplest path. Buy it, wire it up, add it to the Apple Home app, and you are done. The full feature set of the blaQ or ratgdo is not available for Security+ 3.0 yet. That may change as developers study the new protocol, but as of mid-2025, no third-party device reads the Security+ 3.0 data bus.

G Brothers installs and services all major opener brands in the Denver metro and Front Range, including new LiftMaster and Chamberlain models. If you are buying a new opener and want to make sure it is compatible with your HomeKit setup before you commit, we can help you check the learn button color and confirm which integration option fits your opener. Same-day service is available and free estimates are easy to get.